Ideal Frostbite Boat
- ThreeBuoys
- Posts: 384
- Joined: Tue Aug 25, 2015 8:48 pm
- Species: Bass,Salmon,Trout
Ideal Frostbite Boat
Question for the experienced frostbiters.
What would be the ultimate boat for winter fishing?
What would be the ultimate boat for winter fishing?
Re: Ideal Frostbite Boat
Hey,
All my boats were aluminum, garaged and trailered to the "best" spot.
We started in a 16ft open Starcraft Tiller steer and caught a lot of fish. Layers of clothes sure helped.
Then to a Sylvan Super Sport 16 ft. All Canvased up complete with tail curtain with a Mr. Buddy heater.
Had it for 23 years & sold here in 2hrs when I moved up to a 18 ft Alumacraft, All Canvased up by Dennis Carman of Vermont Custom Canvas on Georgia Shore. He Did my first boat too.
I think my 18 is the perfect boat for Champlain easy to haul, store in a plastic shed ready like a Fighter Jet and safe in any water you want.
I run 1 motor 90 hp Evinrude E-Tec runs 30 mph and at 1000 rpms gives me 2.4-2.6 mph sipping 0.2 Gallons per Hour of Non Ethanol. All I have ever run is 1 motor and say it's about maintenance. We never fish alone in Frostbite. Too much can happen in a hurry and extra help needs to be at hand, Plus it's more fun.
Diggitroll:
Have a look at the Posts thru time every Captain here has the Best Boat and there are some nice ones.
Make it the way you like it & take your time.
Get out and enjoy it.
Randy
All my boats were aluminum, garaged and trailered to the "best" spot.
We started in a 16ft open Starcraft Tiller steer and caught a lot of fish. Layers of clothes sure helped.
Then to a Sylvan Super Sport 16 ft. All Canvased up complete with tail curtain with a Mr. Buddy heater.
Had it for 23 years & sold here in 2hrs when I moved up to a 18 ft Alumacraft, All Canvased up by Dennis Carman of Vermont Custom Canvas on Georgia Shore. He Did my first boat too.
I think my 18 is the perfect boat for Champlain easy to haul, store in a plastic shed ready like a Fighter Jet and safe in any water you want.
I run 1 motor 90 hp Evinrude E-Tec runs 30 mph and at 1000 rpms gives me 2.4-2.6 mph sipping 0.2 Gallons per Hour of Non Ethanol. All I have ever run is 1 motor and say it's about maintenance. We never fish alone in Frostbite. Too much can happen in a hurry and extra help needs to be at hand, Plus it's more fun.
Diggitroll:
Have a look at the Posts thru time every Captain here has the Best Boat and there are some nice ones.
Make it the way you like it & take your time.
Get out and enjoy it.
Randy
Last edited by Surprise on Fri Nov 16, 2018 9:08 am, edited 1 time in total.
Fish On!
Re: Ideal Frostbite Boat
How do the rear curtains work? I have a full enclosure for my boat, but the rear part is just a piece of canvas, no vinyl to see through, I think its a mooring cover by definition. How do the vinyl curtains work? is there a zipper in the middle, or is it held closed in some other manner allowing easy pass through?
Re: Ideal Frostbite Boat
A zipper door with 2 zippers between 2 panels. the center also rolls up and is secured with straps when it is warm enough to leave the door open. The whole thing is removable for summer.
Fish On!
- ThreeBuoys
- Posts: 384
- Joined: Tue Aug 25, 2015 8:48 pm
- Species: Bass,Salmon,Trout
Re: Ideal Frostbite Boat
Thanks for the posts and the pics.
I currently have a fiberglass center console which is less than ideal for cold weather fishing.
Nice boat, but more suitable for down South in warmer temps.
I currently have a fiberglass center console which is less than ideal for cold weather fishing.
Nice boat, but more suitable for down South in warmer temps.
Re: Ideal Frostbite Boat
Several have asked about my shed and here it is :
A 12 X 24 plastic garage that I kept my 16 Sylvan in for 20 years & went thru 2 covers.
My new Surprise needed more height so Pete Young and I built a Knee wall and raised it up from my original Rail road tie foundation. I added a 24 x 30 20oz reinforced vinyl tarp to the top for a more permanent cover. Wired up with a couple lights and a drop cord to plug in my onboard battery charger makes sure we are Good to go.
A 12 X 24 plastic garage that I kept my 16 Sylvan in for 20 years & went thru 2 covers.
My new Surprise needed more height so Pete Young and I built a Knee wall and raised it up from my original Rail road tie foundation. I added a 24 x 30 20oz reinforced vinyl tarp to the top for a more permanent cover. Wired up with a couple lights and a drop cord to plug in my onboard battery charger makes sure we are Good to go.
Fish On!
Re: Ideal Frostbite Boat
Randy
It looks like just what I need. Your frame looks like it is metal rather than the PVC stuff that a lot of the plastic garages are made out of. If we have any other Frostbiters that have invested in a Plastic Garage for their boat I sure would like to hear what has worked for them and what tore apart in the first good storm, before I go out and buy something and have it come apart the first year!
It looks like just what I need. Your frame looks like it is metal rather than the PVC stuff that a lot of the plastic garages are made out of. If we have any other Frostbiters that have invested in a Plastic Garage for their boat I sure would like to hear what has worked for them and what tore apart in the first good storm, before I go out and buy something and have it come apart the first year!
- Reelax
- Site Admin
- Posts: 5813
- Joined: Sun Aug 28, 2011 7:27 pm
- Species: Salmon, steelhead, brown trout
- Location: Fletcher, Vt
Re: Ideal Frostbite Boat
It’s not just the welded hull that I have had on plane in 1/8” scimm ice... it’s what you do when you get to the launch and it’s snowed in....
Here’s my rig...
Here’s my rig...
- Attachments
-
- F950CD93-AA56-44D8-B28E-AB31A027D1DF.jpeg (135.41 KiB) Viewed 2410 times
Matt B
Re: Ideal Frostbite Boat
This was my ideal boat but Sold it last fall to someone in the Burlington area. It was getting to much for me to handle as I found myself going fishing alone more often. I trailered it everywhere. It even had a built in diesel stove/heater. A dinette, sink and ice box. The hull weighed in at 1950 lbs. which made it trailer great. It had like 7 to 9 inch draft. I had all my electric downriggers mounted with gimbal mounts for easy removal.
- Attachments
-
- IMG_1192.JPG (141.54 KiB) Viewed 2251 times
-
- IMG_1185.JPG (173.23 KiB) Viewed 2251 times
-
- IMG_1182.JPG (151.66 KiB) Viewed 2251 times
-
- IMG_0014.JPG (78.65 KiB) Viewed 2251 times
Re: Ideal Frostbite Boat
It was my dream boat that I acquired 15 years ago. It was very hard to let it go. But one thing they do not depreciate much.
- ThreeBuoys
- Posts: 384
- Joined: Tue Aug 25, 2015 8:48 pm
- Species: Bass,Salmon,Trout
Re: Ideal Frostbite Boat
That is a sweet boat (C-Dory). More common out West I gather.
Reelax, I like how Smokercraft comes equipped with full canvas for cold weather.
I assume that works well for you?
Reelax, I like how Smokercraft comes equipped with full canvas for cold weather.
I assume that works well for you?
- Reelax
- Site Admin
- Posts: 5813
- Joined: Sun Aug 28, 2011 7:27 pm
- Species: Salmon, steelhead, brown trout
- Location: Fletcher, Vt
Re: Ideal Frostbite Boat
ThreeBuoys wrote:That is a sweet boat (C-Dory). More common out West I gather.
Reelax, I like how Smokercraft comes equipped with full canvas for cold weather.
I assume that works well for you?
Yes the top has been a dream. Room for 4 without crowding and a full back panel with a center zipped section removable or roll up center section. It stays in my truck and after 4 years the plastic still looks new. Key is rolling the windows not folding them. On a 10 deg day we can get the cab up to 65 deg for a comfortable day in th winter lake. The mr buddy propane heater is hooked to a gas gril tank in the bow and a 20lb cylinder usually lasts all frostbite season. It stays on all day...
Matt B
- tamiron
- Posts: 1317
- Joined: Sun Aug 28, 2011 7:11 pm
- Species: trout, salmon
- Location: Granger, IN
- Contact:
Re: Ideal Frostbite Boat
Matt:
How big is that Mr.Buddy?/ Jim
How big is that Mr.Buddy?/ Jim
Lures designed by fishermen for fishermen