We have been using the scotty release and they're not working that good for me. It may be human era"
I'm thinking about trying the Chamberlain release. I would like your advice on this subject. Should i keep trying the Scotty's or try something different?
Thanks Don & Traci
Downrigger release advice needed
- Reelax
- Site Admin
- Posts: 5754
- Joined: Sun Aug 28, 2011 7:27 pm
- Species: Salmon, steelhead, brown trout
- Location: Fletcher, Vt
Re: Downrigger release advice needed
Blacks are easy and cheap... chamberlains are good but big and bulky.
Matt B
- popster
- Posts: 758
- Joined: Sun Aug 28, 2011 10:00 pm
- Species: Salmo Salar Sebago
- Location: Burlington
Re: Downrigger release advice needed
Keith Chamberlain really nailed it with this release. 2 adjustments ...... 1 for vertical tension from the rod to the release, the 2nd adjustment is for horizontal tension to the bait. If adjusted correctly, the Chamberlain eliminates towing around small fish.
I used Blacks for years until Chamberlain’s came along over 10 years ago. I became a believer when Perch and Smelt tripped them.
I used Blacks for years until Chamberlain’s came along over 10 years ago. I became a believer when Perch and Smelt tripped them.
Bill
"POINTER"
"POINTER"
Re: Downrigger release advice needed
Believe Bill, you can set the Chamberlain so a weed trips them. Don't fool with anything else.
- ThreeBuoys
- Posts: 384
- Joined: Tue Aug 25, 2015 8:48 pm
- Species: Bass,Salmon,Trout
Re: Downrigger release advice needed
Chamberlain also makes a stacker release that I have used all by itself 10-15 feet above the cannonball with some success. Like they say...some days you have to try everything in your arsenal!
-
- Posts: 181
- Joined: Tue Aug 30, 2011 10:14 am
- Species: all
- Location: Morrisville, VT
Re: Downrigger release advice needed
Like Bill said you have 2 adjustments. You can have your rods bent to the water and the release tension light enough a small perch will trip it or tighten it up and pull a dave davis or a flasher. Great made in VT product. Ramel
Quit Wishing Go Fishing
Re: Downrigger release advice needed
We really appreciate all the advice and will be ordering some new releases. I will get one or two of each
Blacks and Chamberlains and will let you know witch one works better for me. I would like to have a release that releases when a small fish hits.
Thanks Don & Traci
Blacks and Chamberlains and will let you know witch one works better for me. I would like to have a release that releases when a small fish hits.
Thanks Don & Traci
- finsntins
- Posts: 441
- Joined: Mon Mar 23, 2015 4:58 pm
- Species: salmon
- Location: old forge,ny/little salmon river,mexico,ny
Re: Downrigger release advice needed
blacks releases are great for bigger fish,but you will never get them adjusted just right,i have never used the chaimberlin releases,but again you have to get them adjusted and now you are dealing with two adjustments.for small fish I just use a pinch pad with a 6 to 10 inch "tether" to the back of the ball.a pinch pad with a nice light rigger rod you will be able to see the rod tip bouncing,even if it does not release.simple,cheap,and effective!!!!!I think a light action rigger rod is more important than the release,even if you go with a blacks or chaimberlin,if you have a light action rigger rod,"cinched"down tight,you will see the rod tip bouncing.
Miss B.Haven' sportfishing