auger attachment for 4 wheeler

[Salmonseeker]

Does any know where I can find a attachment for my 4 wheeler to hold my power auger that will allow it to move straight up and down so I can use it to drill a lot of holes and not have to remove it from the holder.

[fishingmachine]

an old freind of mine named Arlyn Phillips from Pittsford made his own several years ago,I saw a picture of it and it looked like a double scissors arrangement, I think he used it on L. Donmore.sorry,that's all I know

[KeeganR]

Found this company. Looks awesome, but expensive as well

http://augereaser.com/index.htm

[Salmonseeker]

I saw that one, $995 more then I would pay , you would think with all the ATV's there would be more then just that one.

[Finaddict]

I am pretty sure cabellas sells one but may be pricy. My friend made one using one of the tracks off from a Nordic trac, he welded a bracket on he bottom that mounted to frame of wheeler and on the slide that attaches to the rail he welded a bracket that cradled the auger. Might be more than you are looking to chew off but it can be done. Hope I helped

[Hairbone]

I saw one on ebay the other day http://www.ebay.com/itm/Snowmobile-Buck ... 4d14f8b87a

[seanympho]

I have one on my fourwheeler that my boyfriend built. We have a brand new 10" Jiffy ( which I got for Valentines day last year) attached. I can drill all the holes effortlessly! I will dig into my pics to show you.

[flyguy]

You can make one out of an old auxiliary engine bracket from a small sail boat. I saw one once on Moosehead lake.

[digitroll (ron)]

There was a small business out of New Hampshire that made the best set up for your auger that went into the receiver on the back.

They sold for around $500 6 years ago. They worked slick and easy! Well built. Don't know if there still in business. I have one of there advertisements. I will check at work today.

[digitroll (ron)]

Googled it and they were called Auger Caddy. Vertical system mounted in the hitch receiver. Been out of business since 2008.

[Off season]

LMAO , 10" Jiffy for Valentines Day! When Digging into your pics, please include a pic of yourself, SEANYMPHO , Just Curious LOL

I have one on my fourwheeler that my boyfriend built. We have a brand new 10" Jiffy ( which I got for Valentines day last year) attached. I can drill all the holes effortlessly! I will dig into my pics to show you.

[seanympho]

Here is my auger on my four wheeler. It has a spring attached counterweight as well which makes it super easy for me to handle. Manufactured by Goose at HydroPrecision in Colchester. Also a pic of a Lake Trout and a Northern from a couple of weeks ago.

[Gecha (Gerry)]

Nice auger setup... and nice catches

[Off season]

Very nice set up! Keep catching them girl!