Lake Trout Jigs

Lure modification. From taping and painting to manufacturing your own fishing lures.
Post Reply
User avatar
Hairbone
Posts: 970
Joined: Wed Aug 31, 2011 5:05 pm
Species: Bluegill
Location: Whallons Bay...They Are ALWAYS Biting... ;)

Lake Trout Jigs

Post by Hairbone »

I have poured a bunch of bank sinkers in the past using the cast iron pot and ladle method. I had collected a few molds off e-bay over the past 6 months and put some hooks together to come up with some deep water jigs to mess with. Santa was nice to me a I got a Lee pro 4-20 melter, so it is easier to work with. I have used lead head jigs in the past with either bucktail, marabou or soft plastics that I made myself from factory heads. Larger sized heads are hard to find with light hooks so I wanted to make some to my specifications. Though I would share what I have had cooking so far:

Pictured on the left is a 1 oz 5/0 with #7 barrel swivel for attaching a blade., 1 oz stand up erie with a 4/0 heavy wire & 4/0 light wire hook.
On the right is a 2 oz spoon, 1.5 oz spoon and 3/4 Hopkins for size comparison.

Image

Image
Gecha (Gerry)
Posts: 4448
Joined: Mon Aug 29, 2011 12:26 pm
Species: whatever crazy enough to bite

Re: Lake Trout Jigs

Post by Gecha (Gerry) »

Good work with those jigs and spoons. They look very nice.
Gecha (Gerry North of the Border)
User avatar
fishy1
Posts: 3970
Joined: Fri Aug 22, 2014 7:21 pm
Species: many species

Re: Lake Trout Jigs

Post by fishy1 »

if we had safe ice we could try them out.
User avatar
Targa V18
Posts: 306
Joined: Sun Jan 17, 2016 8:52 pm
Species: lake trout/Salmon
Location: Mineville, NY

Re: Lake Trout Jigs

Post by Targa V18 »

Are you dipping them into powder paint for colors?
User avatar
Hairbone
Posts: 970
Joined: Wed Aug 31, 2011 5:05 pm
Species: Bluegill
Location: Whallons Bay...They Are ALWAYS Biting... ;)

Re: Lake Trout Jigs

Post by Hairbone »

I have played around with the powder paint. I am using a toaster oven I got from a garage sale for $5.

The lead heads are easy to coat, but the spoons are much more difficult do to their size.

I base coated in white and used pro tec glow green on some of the spoons but wasn't happy with the glow layer. Will post some pics later.

I will hook you up with some Targa
User avatar
Hairbone
Posts: 970
Joined: Wed Aug 31, 2011 5:05 pm
Species: Bluegill
Location: Whallons Bay...They Are ALWAYS Biting... ;)

Re: Lake Trout Jigs

Post by Hairbone »

pro tec super glow green over a white base coat at 20 seconds under black light. Comes out with a mottled look.

Image

Image
User avatar
fishy1
Posts: 3970
Joined: Fri Aug 22, 2014 7:21 pm
Species: many species

Re: Lake Trout Jigs

Post by fishy1 »

nice job harry.
User avatar
Targa V18
Posts: 306
Joined: Sun Jan 17, 2016 8:52 pm
Species: lake trout/Salmon
Location: Mineville, NY

Re: Lake Trout Jigs

Post by Targa V18 »

Hairbone wrote:I have played around with the powder paint. I am using a toaster oven I got from a garage sale for $5.

The lead heads are easy to coat, but the spoons are much more difficult do to their size.

I base coated in white and used pro tec glow green on some of the spoons but wasn't happy with the glow layer. Will post some pics later.

I will hook you up with some Targa
Sweet! Thanks for the response. The lead heads look great.
Post Reply