Hammerhead Vertical Blades Broke
- popster
- Posts: 760
- Joined: Sun Aug 28, 2011 10:00 pm
- Species: Salmo Salar Sebago
- Location: Burlington
Hammerhead Vertical Blades Broke
Just wondering if anyone has had any issues with crimps coming apart on Large Hammerhead Verticals sold by Fish 307? Unfortunately, the upper thimble was all that remained after letting it out over the side. Lost the blades and a 13# weight. How many use or have bought these?
Lost one of these
Lost one of these
Bill
"POINTER"
"POINTER"
- Crazy Ivan
- Posts: 884
- Joined: Sun Aug 28, 2011 5:22 pm
- Species: All
Re: Hammerhead Vertical Blades Broke
Bill,
That sucks....... I have at least 15 or more sets of those,blades and have never had one come apart. I have had to tape and retape them a few times. The tape they use does not like the deep cold water.
I have to wonder if the company understands that we are running them soooooo deep. Wonder what the torque is on them at 100 ft vs 35 ft... somthing has to give.....
Todd
That sucks....... I have at least 15 or more sets of those,blades and have never had one come apart. I have had to tape and retape them a few times. The tape they use does not like the deep cold water.
I have to wonder if the company understands that we are running them soooooo deep. Wonder what the torque is on them at 100 ft vs 35 ft... somthing has to give.....
Todd
Todd
-
- Posts: 3684
- Joined: Sun Aug 28, 2011 12:58 pm
Re: Hammerhead Vertical Blades Broke
I have had blades come off, but never lost a weight. I have about 10 sets.
-
- Posts: 3684
- Joined: Sun Aug 28, 2011 12:58 pm
Re: Hammerhead Vertical Blades Broke
I run mine with 8 lb pancakes here with probably quite a lot less stress on them and the equipment. We run 12 lb pancakes in Ontario but no blades.
Re: Hammerhead Vertical Blades Broke
Same as Ron..using pancakes. Never had any problem.
Re: Hammerhead Vertical Blades Broke
Buy Fatheads blades you will never have a problem!
- fishingmachine
- Posts: 860
- Joined: Tue Aug 30, 2011 2:48 pm
- Species: salmon,Lake trout
- Location: Rutland
Re: Hammerhead Vertical Blades Broke
2nd thatFATHEAD wrote:Buy Fatheads blades you will never have a problem!
-
- Posts: 73
- Joined: Sat Oct 05, 2013 8:28 pm
- Species: salmon
Re: Hammerhead Vertical Blades Broke
i currently use the regular round balls and they pull hard at 70+ft where can i go to get weights that don't pull so hard? I use a 12pound on subtroll and 10s on others.
- fishingmachine
- Posts: 860
- Joined: Tue Aug 30, 2011 2:48 pm
- Species: salmon,Lake trout
- Location: Rutland
Re: Hammerhead Vertical Blades Broke
I use 10 # pancake weights and have never had a problem,,they don't dig in when dragging bottom,either
-
- Posts: 73
- Joined: Sat Oct 05, 2013 8:28 pm
- Species: salmon
Re: Hammerhead Vertical Blades Broke
I got some 10# pancakes MUCH better deeper.. even with probe on one side and verticals on other, If anyone has a twelve# pancake they would like to sell PM me. not interested in paying datillios 50 bucks for one weight.
- fishfarmer
- Posts: 121
- Joined: Thu Sep 01, 2011 7:09 pm
- Species: Piscies
- Location: Brandon, VT
Re: Hammerhead Vertical Blades Broke
I had some issues with one set I bought recently. I was going through my blades the other day and noticed one of the ends was loose. I brought my FATHEAD blades to the shootout because of this.