Page 2 of 2

Re: Leadcore Question

Posted: Thu Jun 08, 2017 9:48 am
by Gecha (Gerry)
Thanks Bigfish for the info, very helpful.

Re: Leadcore Question

Posted: Wed Jun 21, 2017 4:38 pm
by 4sixty
I only use I color of leadcore or two I found during the rotory two colors was hot jofc the planner boards I use Willis knot but sometimes I can't do that knot if mkno is limp so I use improved Albright works great . I only run three colors once and could never catch anything on it good luck two. Colors off plsners work well

Re: Leadcore Question

Posted: Thu Jun 22, 2017 6:43 am
by Hairbone
4sixty wrote:I only use I color of leadcore or two I found during the rotory two colors was hot jofc the planner boards I use Willis knot but sometimes I can't do that knot if mkno is limp so I use improved Albright works great . I only run three colors once and could never catch anything on it good luck two. Colors off plsners work well
X2.

Everyone should have at least 1 leadcore set up to run down the shoot if they are just running riggers and no junk lines. A 10 color set up on a 30 sized 6.2.1 high speed reel will always produce and give a lot of flexability. The high speed reel is a must to get the slack out of the line as quick as possible