ICY Saturday at Converse

Check and share here for the latest fishing reports.
Post Reply
User avatar
Reelax
Site Admin
Posts: 6236
Joined: Sun Aug 28, 2011 7:27 pm
Species: Salmon, steelhead, brown trout
Location: Fletcher, Vt

ICY Saturday at Converse

Post by Reelax »

SteelieJoe, Esad and I had plans to
Fish Saturday after Christmas…. It turned out to be a cold start with 1” of fresh snow at my house and 12 deg on way to launch.

Link to short video of launch ice.

https://youtube.com/shorts/Lp3P8bMSR_Y? ... OTsvXn3E2o

We met NHJim and
Dry Net at the launch after trailering
From
NH their boat looked like an ice berg:)

We launched at 730am and set lines in front of garden. I set the port rigger and went to work on the next line and it fired
With a laker on the cheater down 20. Quick start! Over the next 3 hrs we landed fish after fish half salmon and all fighting hard in the 40 deg water.

Riggers, slide divers and 5 color
Lead all did damage. The north wind had whipped up 2-3 footers so we tricked into townfarm bay and spent the better part of the morning working the 50-70 foot areas.


Menu today was Dunkin’ Donuts to start with baked hot pretzels close out with some
Ribeyes and fillets that were very tasty!!

By noon the counter was at 24 and the bite tapered some… best spoons are blue dream and cop car

Bite was 15-40 but most active at 25 down

We continued till 1 and pulled em. By the time we ended we had the counter at 28 and over half were salmon….

Great day on the water and all systems are
Go as long as the ice stays away:)

Thanks for the fun time
Guys!!
Attachments
IMG_8496.jpeg
IMG_8496.jpeg (208.66 KiB) Viewed 844 times
IMG_8439.jpeg
IMG_8439.jpeg (145.67 KiB) Viewed 1142 times
IMG_8440.jpeg
IMG_8440.jpeg (210.68 KiB) Viewed 1142 times
IMG_8448.jpeg
IMG_8448.jpeg (211.84 KiB) Viewed 1142 times
IMG_8455.jpeg
IMG_8455.jpeg (186.53 KiB) Viewed 1142 times
IMG_8457.jpeg
IMG_8457.jpeg (150.79 KiB) Viewed 1142 times
IMG_8461.jpeg
IMG_8461.jpeg (157.4 KiB) Viewed 1142 times
IMG_8480.jpeg
IMG_8480.jpeg (315.07 KiB) Viewed 1142 times
IMG_8493.jpeg
IMG_8493.jpeg (176.23 KiB) Viewed 1142 times
IMG_8500.jpeg
IMG_8500.jpeg (185.88 KiB) Viewed 1142 times
IMG_8501.jpeg
IMG_8501.jpeg (172.4 KiB) Viewed 1142 times
IMG_8504.jpeg
IMG_8504.jpeg (194.88 KiB) Viewed 1142 times
Resized_20251227_091530.jpeg
Resized_20251227_091530.jpeg (97.11 KiB) Viewed 1142 times
IMG_8503.jpeg
IMG_8503.jpeg (172.73 KiB) Viewed 1142 times
imagejpeg_0.jpeg
imagejpeg_0.jpeg (108.43 KiB) Viewed 1142 times
imagejpeg_0.jpeg
imagejpeg_0.jpeg (91.39 KiB) Viewed 1142 times
imagejpeg_0.jpeg
imagejpeg_0.jpeg (119.11 KiB) Viewed 1142 times
IMG_8516.jpeg
IMG_8516.jpeg (102.25 KiB) Viewed 1142 times
IMG_8522.jpeg
IMG_8522.jpeg (161.91 KiB) Viewed 1142 times
imagejpeg_0.jpeg
imagejpeg_0.jpeg (145.36 KiB) Viewed 1142 times
Matt B
Sponsor
Top
User avatar
homewrecker
Posts: 789
Joined: Tue Aug 30, 2011 7:00 am
Species: salmon,mermaids
Location: Essex Jct

Re: ICY Saturday at Converse

Post by homewrecker »

Way to get the ice out and use every last opportunity to use your license. Nice trip guys.
dry net
Posts: 367
Joined: Sun Sep 18, 2016 5:34 pm
Species: cold water

Re: ICY Saturday at Converse

Post by dry net »

Nice to talk to you guys at the launch this morning. That was NOT my boat, I'm way too much of a baby to pull mine this time of year. All credit to NH Jim for braving the tow!!
User avatar
Mistress
Posts: 284
Joined: Fri Jun 03, 2022 6:23 am
Species: cold water
Location: Milton VT

Re: ICY Saturday at Converse

Post by Mistress »

Sorry I missed the fun, the wife said I’ve been spending too much time on my Mistress so I opted to avoid divorce court and stay on the hard. It sounds like a repeat of last weekend and in typical Reelax fashion you had the eats extraordinaire! Nice showing guys!!
Pat
User avatar
finsntins
Posts: 588
Joined: Mon Mar 23, 2015 4:58 pm
Species: salmon
Location: old forge,ny/little salmon river,mexico,ny

Re: ICY Saturday at Converse

Post by finsntins »

Great job guys,some nice fish matt!!!!
Miss B.Haven' sportfishing
User avatar
Crayfish
Posts: 612
Joined: Mon Jun 15, 2015 11:47 am
Species: All of them
Location: Jericho, Vermont

Re: ICY Saturday at Converse

Post by Crayfish »

Way to go, Matt and Esad! Sounds like a great post-Christmas trip!
Jump
Posts: 45
Joined: Wed Sep 26, 2012 11:01 pm
Species: Salmon

Re: ICY Saturday at Converse

Post by Jump »

A trolling report after Christmas is like some late arriving gift over here in NH, Matt.
As Barttles and James used to say, "We thank you for your support."
One Question; Does one do anything for and about the outboard motor upon exit in those sub freezing temps?

Jump
User avatar
Mistress
Posts: 284
Joined: Fri Jun 03, 2022 6:23 am
Species: cold water
Location: Milton VT

Re: ICY Saturday at Converse

Post by Mistress »

Hey Jump
The beauty of outboards and frostbiting is all I do is lower the engine after loading out and let the water gravity drain while stowing gear for road travel. That easy!
Happy New Year!
Pat
User avatar
ChessieMan
Posts: 269
Joined: Sat Dec 13, 2014 10:48 am
Species: trout/salmon

Re: ICY Saturday at Converse

Post by ChessieMan »

The Money Pit is under 8" of snow, the ice is not thick enough yet and I am Soooooooo jealous! Way to go guys
Jump
Posts: 45
Joined: Wed Sep 26, 2012 11:01 pm
Species: Salmon

Re: ICY Saturday at Converse

Post by Jump »

Note to self;

Be sure to raise motor after following Pat's directions.
That first strange noise might otherwise be painful upon inspection
Don't laugh Mssr Wright, it's what you're coming to.
Heh ! But not so funny

Jump I-have-seen-a-lot-of-skeg-marks Parenteau
But so far so good
User avatar
drachma
Posts: 600
Joined: Fri Sep 02, 2011 3:42 pm
Species: Salmon, Lake Trout

Re: ICY Saturday at Converse

Post by drachma »

Harrrdddd Core Matt?
What a time and report!
Michael
User avatar
Surprise
Posts: 1400
Joined: Sun Aug 28, 2011 9:03 pm
Species: FROSTBITING

Re: ICY Saturday at Converse

Post by Surprise »

Keep up the Spirit.

Nice Post and Pictures of some Classic Frostbite Silver!

Surprise is in at Champlain Valley Marine to have a Top Seal Kit installed on my Motor lift & Get A 300 Hr . Evinrude E-Tec motor maintenance go thru.

Mike Paquette bought Champlain Valley Motorsports & renamed Champlain Valley Marine to reflect his Marine repair & Boat storage.

Great Guy and did Surprise 3 years ago when he was a worker bee there. Performed the job for a third less than Chittenden County shops.
And I must add way more friendly and thorough than a Mallets bay shop.

If you need an Evinrude E-tec serviced or repaired give him a call.

Champlain Valley Marine LLC

www.champlainvalleymotorsports.com
Boat repair in Cornwall, VT
2394 VT-30, Cornwall, VT 05753 ·
(802) 462-2468

Back on the Pond when we Can!

Happy New Year All,
Randy
Fish On!
TUnamas
Posts: 937
Joined: Tue Aug 30, 2011 1:16 pm

Re: ICY Saturday at Converse

Post by TUnamas »

Well done Captain and crew! Claiming the first post of 2026! You've earned it!
Post Reply